Cutjet 3 Axis Waterjet CNC

Products

Catalogs

Click on the link below to access the product catalogs developed by Robjet Cutting Technologies.

Download

Need support?

+90 850 213 85 62
info@robjet.com
Kayapa OSB, Sarı Cd., 16315 Nilüfer/Bursa

Or fill in the form

CUTJET-W3

The CUTJET-W3 is a straightforward 2D quality waterjet cutting system for cutting many materials such as glass, marble, granite, metal. Due to high-pressure abrasive cutting and being a cold process, problems such as burning, droplets, deformation caused by thermal reasons will be prevented.

Properties

Our system is a rack gear drive system.
In the Z-Axis, a screw shaft is used for motion transmission and a heavy-duty ball circulating trolley bed mechanism is used for cushioning.
Protection bellows, rectangular cross-section, completely closed form. It is impossible for water and abrasive to reach the bearing, drive element, motors, and electrical equipment.
All protection sheets and water tanks are stainless steel.
The abrasive dosing unit is stepper motor-driven and insulated against water and moisture.
The main chassis is made resistant to water and humidity by going through the stages of sandblasting, epoxy priming, and epoxy paint.
The machine body is manufactured on a steel chassis machined body, with aluminum construction machined bridge axis structure. In this way, by preventing vibration that occurs in high-accelerated movements, precision cutting can be done.

Technical Information
Work Envelope	CUTJET-W3-3020		CUTJET-W3-4020
X Cutting Travel	3000	mm	4000	mm
Y Cutting Travel	2000	mm	2000	mm
Z Cutting Travel	200	mm	200	mm
Table Size	3000×2000	mm	4000×2000	mm
Dynamc Specs.
X Axis Max. Speed	60		m/min.
Y Axis Max. Speed	60		m/min.
X Axis Max. Acceleration	10		m/s^2
Y Axis Max. Acceleration	10		m/s^2
Max Cutting Speed	2		m/min.
Accuracy
Positioning Accuracy ±	0,05		mm
Repetition Accuracy ±	0,03		mm
Controller Unit
CNC	Fagor / Beckhoff
Screen	11” / 21”
Power Source	380VAC 50hz 3 Faz

High-Pressure Pump

AQRO S50C+ high-pressure pump provides fast, quality, and smooth cutting with 3800 bar pressure.

Abrasive Dosing Unit(Feeder)

The abrasive feeder is located on Z-axis. The sand in the abrasive sand tank passes through a certain strainer and the cutting process is carried out. According to material type and thickness, the sand flow rate is calibrated manually or automatically from Cnc Control Unit. It can be increased up to a minimum of 60gr/min and a maximum of 600 gr/min.

Abrasive Hopper Sand Barrel

Sand barrel helps abrasive sand to be transported to the sand mixer with the help of compressed air. With the conditioner on it, the air is adjusted to 2 bar, at the same time it dehumidifies the air entering the sand tank. Abrasive sand tank max capacity is 200 lt.

Control Unit

Pre-cut parameters of standard materials (marble, ceramic, steel, stainless, aluminum, copper, composite, glass, brass, felt) in certain thicknesses record in the system by ROBJET instructors. Considering these reference values, the operator improves the cutting quality with small adjustments according to the changing sheet qualities.

RTSP Software Specification
Manual or automatic set calibration
Backward operating feature with retracing
Parametric programming
Z-Axis Offset with Handwheel
Laser Height Control

Software

With Lantek, drawing files in many formats can be easily nested, inputs and outputs can be assigned automatically and made ready for cutting.